Home 9 Mesh accessories

Mesh accessories

Mesh accessories


Reveal beads (window/door framing profiles) consist of impact-resistant hard PVC and are sed in the transition of plaster surfaces with doors and windows.

They help to create a correctly aligned and perpendicular window/door framing solution and establish and elastic connection of the plaster and the window/door frame, thus preventing the development of cracks.


for various plaster thicknesses

  • 6 mm
  • 8 mm
  • 9 mm


Reveal beads with mesh

for various plaster thicknesses with alkali-resistant ETICS mesh

  • 6 mm
  • 8 mm
  • 9 mm

Glass mesh fabrics

Reveal beads with lip

The lip covers the foam tape, thus creating a visually clean transition between the plaster and the window.

Dynamic reveal beads

  • High 3D movement absorption
  • Optimal processing (pressing) due to an integrated punch element in the hollow section
  • Very good plaster interlocking (perforated bar, riffles in plaster absorption area)
  • Wide flap to stick the protective foil
  • Resistant and reliable mesh attachment
  • Aesthetic value due to low construction height and lip
    • 6 mm
    • 9 mm

Reveal beads with lip

For various plaster thicknesses

  • 6 mm
  • 9 mm

Reveal beads with lip and mesh

With alkali-resistant ETICS mesh

  • 9 mm

Glass mesh fabrics

Corner beads

Corner beads with mesh

With a PVC corner bead, available in various colours and sizes, for the safe and clean finishing of building corners.

Shank size

  • 8 cm x 12 cm
  • 10 cm x 15 cm
  • 10 cm x 23 cm
  • Shank size

Corner beads with mesh and extraction edge

The extraction edge allows to form an exact corner by clean extracting of the mortar.

10 cm x 15 cm, extraction edge 5 mm


Narożnik z kapinosem

Narożniki z siatką z kapinosem stosuje się na wystających elementach budynku (np. na balkonie) i służą one do bezpiecznego odprowadzania wód opadowych od budynku.

10 cm x 10 cm, tynk o grubości 5 mm

Glass mesh fabrics


PVC socle profiles with mesh and extraction edge

This profile considerably minimises the heat bridging effect compared with conventional metal profiles. They are used as socle ends to hold insulation plates.

Profile width 100, 120, 140 and 160 mm Length 200cm


Socle “plug in” profiles

A “plug in” profile is usually used between perimeters and facade insulation. The profile is free from heat bridging properties and the longitudinal riffles allow a better grip of the insulation material. The use of a common socle profile is not necessary with this version.

  • Profile width 80 and 120 mm
  • Length 200 cm
  • Plaster thickness 6 mm

Glass mesh fabrics


Expansion joint profile with elastic middle component

With mesh, for surfaces and internal corners.

Length 200 cm

Plaster thickness 6 mm

Joint tape

Self adhesive fibreglass reinforcement mesh for bridging cracks and joints in plasterboards.

90 m / roll Width 50 and 100 mm

End profiles (L-profiles) for various plaster thicknesses

Hard PVC profiles with laminated fabric for the plaster finishing.

3 mm 6 mm

Mesh sword (mesh arrow) made of ETICS fabric

Mesh swords/arrows are used for corner reinforcement in building openings (e.g. windows, doors).

50 cm x 33 cm, 160 g/m², mesh size approx. 4 x 4 mm


Our non-wovens are used primarily for covering ceiling joints, nicks and cracks, and they can be painted.

Non-woven for joints

Non-woven 45 g/m², 5 cm wide

Non-wovens for paintings

Non-woven 45 g/m², 1 m wide